///////////////////////////////////////////////////////////////////////////////////////////////
//
// This File is Part of the CallButler Open Source PBX (http://www.codeplex.com/callbutler
//
// Copyright (c) 2005-2008, Jim Heising
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
// * Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// * Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation and/or
// other materials provided with the distribution.
//
// * Neither the name of Jim Heising nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific prior
// written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
// IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
// INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
///////////////////////////////////////////////////////////////////////////////////////////////
using System;
using System.Security.Cryptography;
using System.Text;
using System.Globalization;
using System.IO;
namespace WOSI.Utilities
{
/// <summary>
/// Summary description for CryptoUtils.
/// </summary>
public class CryptoUtils
{
private CryptoUtils()
{
//
// TODO: Add constructor logic here
//
}
// Decrypt a byte array into a byte array using a key and an IV
public static byte[] Decrypt(byte[] cipherData,
byte[] Key, byte[] IV)
{
try
{
// Create a MemoryStream that is going to accept the
// decrypted bytes
MemoryStream ms = new MemoryStream();
// Create a symmetric algorithm.
// We are going to use Rijndael because it is strong and
// available on all platforms.
// You can use other algorithms, to do so substitute the next
// line with something like
// TripleDES alg = TripleDES.Create();
Rijndael alg = Rijndael.Create();
// Now set the key and the IV.
// We need the IV (Initialization Vector) because the algorithm
// is operating in its default
// mode called CBC (Cipher Block Chaining). The IV is XORed with
// the first block (8 byte)
// of the data after it is decrypted, and then each decrypted
// block is XORed with the previous
// cipher block. This is done to make encryption more secure.
// There is also a mode called ECB which does not need an IV,
// but it is much less secure.
alg.Key = Key;
alg.IV = IV;
// Create a CryptoStream through which we are going to be
// pumping our data.
// CryptoStreamMode.Write means that we are going to be
// writing data to the stream
// and the output will be written in the MemoryStream
// we have provided.
CryptoStream cs = new CryptoStream(ms,
alg.CreateDecryptor(), CryptoStreamMode.Write);
// Write the data and make it do the decryption
cs.Write(cipherData, 0, cipherData.Length);
// Close the crypto stream (or do FlushFinalBlock).
// This will tell it that we have done our decryption
// and there is no more data coming in,
// and it is now a good time to remove the padding
// and finalize the decryption process.
cs.Close();
// Now get the decrypted data from the MemoryStream.
// Some people make a mistake of using GetBuffer() here,
// which is not the right way.
byte[] decryptedData = ms.ToArray();
return decryptedData;
}
catch
{
return null;
}
}
// Decrypt a string into a string using a password
// Uses Decrypt(byte[], byte[], byte[])
public static string Decrypt(string cipherText, string Password)
{
try
{
// First we need to turn the input string into a byte array.
// We presume that Base64 encoding was used
byte[] cipherBytes = Convert.FromBase64String(cipherText);
// Then, we need to turn the password into Key and IV
// We are using salt to make it harder to guess our key
// using a dictionary attack -
// trying to guess a password by enumerating all possible words.
PasswordDeriveBytes pdb = new PasswordDeriveBytes(Password,
new byte[] {0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d, 0x65,
0x64, 0x76, 0x65, 0x64, 0x65, 0x76});
// Now get the key/IV and do the decryption using
// the function that accepts byte arrays.
// Using PasswordDeriveBytes object we are first
// getting 32 bytes for the Key
// (the default Rijndael key length is 256bit = 32bytes)
// and then 16 bytes for the IV.
// IV should always be the block size, which is by
// default 16 bytes (128 bit) for Rijndael.
// If you are using DES/TripleDES/RC2 the block size is
// 8 bytes and so should be the IV size.
// You can also read KeySize/BlockSize properties off
// the algorithm to find out the sizes.
byte[] decryptedData = Decrypt(cipherBytes,
pdb.GetBytes(32), pdb.GetBytes(16));
// Now we need to turn the resulting byte array into a string.
// A common mistake would be to use an Encoding class for that.
// It does not work
// because not all byte values can be represented by characters.
// We are going to be using Base64 encoding that is
// designed exactly for what we are trying to do.
return System.Text.Encoding.Unicode.GetString(decryptedData);
}
catch
{
return null;
}
}
// Decrypt bytes into bytes using a password
// Uses Decrypt(byte[], byte[], byte[])
public static byte[] Decrypt(byte[] cipherData, string Password)
{
// We need to turn the password into Key and IV.
// We are using salt to make it harder to guess our key
// using a dictionary attack -
// trying to guess a password by enumerating all possible words.
PasswordDeriveBytes pdb = new PasswordDeriveBytes(Password,
new byte[] {0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d,
0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76});
// Now get the key/IV and do the Decryption using the
//function that accepts byte arrays.
// Using PasswordDeriveBytes object we are first getting
// 32 bytes for the Key
// (the default Rijndael key length is 256bit = 32bytes)
// and then 16 bytes for the IV.
// IV should always be the block size, which is by default
// 16 bytes (128 bit) for Rijndael.
// If you are using DES/TripleDES/RC2 the block size is
// 8 bytes and so should be the IV size.
// You can also read KeySize/BlockSize properties off the
// algorithm to find out the sizes.
return Decrypt(cipherData, pdb.GetBytes(32), pdb.GetBytes(16));
}
// Decrypt a file into another file using a password
public static void Decrypt(string fileIn,
string fileOut, string Password)
{
try
{
// First we are going to open the file streams
FileStream fsIn = new FileStream(fileIn,
FileMode.Open, FileAccess.Read);
FileStream fsOut = new FileStream(fileOut,
FileMode.OpenOrCreate, FileAccess.Write);
// Then we are going to derive a Key and an IV from
// the Password and create an algorithm
PasswordDeriveBytes pdb = new PasswordDeriveBytes(Password,
new byte[] {0x49, 0x76, 0x61, 0x6e, 0x20, 0x4d,
0x65, 0x64, 0x76, 0x65, 0x64, 0x65, 0x76});
Rijndael alg = Rijndael.Create();
alg.Key = pdb.GetBytes(32);
alg.IV = pdb.GetBytes(16);
// Now create a crypto stream through which we are going
// to be pumping data.
// Our fileOut is going to be receiving the Decrypted bytes.
CryptoStream cs = new CryptoStream(fsOut,
alg.CreateDecryptor(), CryptoStreamMode.Write);
// Now will will initialize a buffer and will be
// processing the input file in chunks.
// This is done to avoid reading the whole file (which can be
// huge) into memory.
int bufferLen = 4096;
byte[] buffer = new byte[bufferLen];
int bytesRead;
do
{
// read a chunk of data from the input file
bytesRead = fsIn.Read(buffer, 0, bufferLen);
// Decrypt it
cs.Write(buffer, 0, bytesRead);
} while (bytesRead != 0);
// close everything
cs.Close(); // this will also close the unrelying fsOut stream
fsIn.Close();
}
catch
{
}
}
}
}
|