001: /*
002: The contents of this file are subject to the Common Public Attribution License
003: Version 1.0 (the "License"); you may not use this file except in compliance with
004: the License. You may obtain a copy of the License at
005: http://www.projity.com/license . The License is based on the Mozilla Public
006: License Version 1.1 but Sections 14 and 15 have been added to cover use of
007: software over a computer network and provide for limited attribution for the
008: Original Developer. In addition, Exhibit A has been modified to be consistent
009: with Exhibit B.
010:
011: Software distributed under the License is distributed on an "AS IS" basis,
012: WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the
013: specific language governing rights and limitations under the License. The
014: Original Code is OpenProj. The Original Developer is the Initial Developer and
015: is Projity, Inc. All portions of the code written by Projity are Copyright (c)
016: 2006, 2007. All Rights Reserved. Contributors Projity, Inc.
017:
018: Alternatively, the contents of this file may be used under the terms of the
019: Projity End-User License Agreeement (the Projity License), in which case the
020: provisions of the Projity License are applicable instead of those above. If you
021: wish to allow use of your version of this file only under the terms of the
022: Projity License and not to allow others to use your version of this file under
023: the CPAL, indicate your decision by deleting the provisions above and replace
024: them with the notice and other provisions required by the Projity License. If
025: you do not delete the provisions above, a recipient may use your version of this
026: file under either the CPAL or the Projity License.
027:
028: [NOTE: The text of this license may differ slightly from the text of the notices
029: in Exhibits A and B of the license at http://www.projity.com/license. You should
030: use the latest text at http://www.projity.com/license for your modifications.
031: You may not remove this license text from the source files.]
032:
033: Attribution Information: Attribution Copyright Notice: Copyright � 2006, 2007
034: Projity, Inc. Attribution Phrase (not exceeding 10 words): Powered by OpenProj,
035: an open source solution from Projity. Attribution URL: http://www.projity.com
036: Graphic Image as provided in the Covered Code as file: openproj_logo.png with
037: alternatives listed on http://www.projity.com/logo
038:
039: Display of Attribution Information is required in Larger Works which are defined
040: in the CPAL as a work which combines Covered Code or portions thereof with code
041: not governed by the terms of the CPAL. However, in addition to the other notice
042: obligations, all copies of the Covered Code in Executable and Source Code form
043: distributed must, as a form of attribution of the original author, include on
044: each user interface screen the "OpenProj" logo visible to all users. The
045: OpenProj logo should be located horizontally aligned with the menu bar and left
046: justified on the top left of the screen adjacent to the File menu. The logo
047: must be at least 100 x 25 pixels. When users click on the "OpenProj" logo it
048: must direct them back to http://www.projity.com.
049: */
050: package com.projity.offline_graphics;
051:
052: import java.awt.Dimension;
053: import java.awt.Graphics2D;
054: import java.awt.Rectangle;
055: import java.util.List;
056:
057: import com.projity.graphic.configuration.SpreadSheetFieldArray;
058: import com.projity.pm.graphic.gantt.GanttRenderer;
059: import com.projity.pm.graphic.graph.GraphParams;
060: import com.projity.pm.graphic.model.cache.NodeModelCache;
061: import com.projity.pm.graphic.model.cache.NodeModelCacheFactory;
062: import com.projity.pm.graphic.model.cache.ReferenceNodeModelCache;
063: import com.projity.pm.graphic.spreadsheet.SpreadSheetParamsImpl;
064: import com.projity.pm.graphic.spreadsheet.SpreadSheetRenderer;
065: import com.projity.pm.graphic.spreadsheet.renderer.FontManager;
066: import com.projity.pm.graphic.timescale.CoordinatesConverter;
067: import com.projity.pm.graphic.timescale.TimeScaleComponent;
068: import com.projity.pm.task.Project;
069: import com.projity.print.FooterRenderer;
070:
071: /*
072: *
073: */
074: public class GanttSVGRenderer implements SVGRenderer {
075: protected SpreadSheetParamsImpl params;
076: protected CoordinatesConverter coord;
077: protected GanttRenderer ganttRenderer;
078: protected SpreadSheetRenderer spreadSheetRenderer;
079: protected FooterRenderer footerRenderer;
080: protected Project project;
081:
082: public void init(Project project, ReferenceNodeModelCache refCache) {
083: init(project, NodeModelCacheFactory.getInstance()
084: .createFilteredCache(
085: (ReferenceNodeModelCache) refCache,
086: "OfflineGantt", null), null, null, -1, true);
087: }
088:
089: public void init(Project project, NodeModelCache cache,
090: SpreadSheetFieldArray fieldArray, List<Integer> colWidth,
091: int scale, boolean printGantt) {
092: this .project = project;
093: coord = new CoordinatesConverter(project);
094: if (scale != -1)
095: coord.getTimescaleManager().setCurrentScaleIndex(scale);
096: params = new SpreadSheetParamsImpl(fieldArray, colWidth,
097: printGantt);
098:
099: params.setCache(cache);
100: params.setCoord(coord);
101: ganttRenderer = new GanttRenderer(params);
102: spreadSheetRenderer = new SpreadSheetRenderer(params);
103: footerRenderer = new FooterRenderer(params);
104: cache.update();
105: }
106:
107: public void paint(Graphics2D g) {
108: paint(g, -1, -1);
109: }
110:
111: public void paint(Graphics2D g, int prow, int pcol) {
112: Rectangle drawingBounds = params.getDrawingBounds();
113: int ganttX = params.getSpreadSheetBounds().width;
114: int ganttY = 0;
115: //int ganttWidth=params.getGanttBounds().width;
116: Rectangle spreadsheetPrintBounds = null;
117: Rectangle ganttPrintBounds = null;
118: boolean drawSpreadsheet = true;
119: boolean drawGantt = true;
120: int rowH = params.getConfiguration().getColumnHeaderHeight();
121: if (prow == -1) {
122: g.drawRect(0, 0, drawingBounds.width, drawingBounds.height);
123: g.drawLine(drawingBounds.x, drawingBounds.y,
124: drawingBounds.x + drawingBounds.width,
125: drawingBounds.y);
126: } else {
127: spreadsheetPrintBounds = params.getSpreadsheetPrintBounds(
128: prow, pcol, false);
129: if (spreadsheetPrintBounds == null
130: || !params.isLeftPartVisible())
131: drawSpreadsheet = false;
132: else {
133: //ganttX=spreadsheetPrintBounds.x+spreadsheetPrintBounds.width;
134: //ganttY=spreadsheetPrintBounds.y-params.getConfiguration().getColumnHeaderHeight();
135: }
136: ganttPrintBounds = params.getGanttPrintBounds(prow, pcol);
137: if (ganttPrintBounds == null)
138: drawGantt = false;
139: else {
140: ganttX = params.getGanttDeltaX(prow, pcol);
141: ganttY = -ganttPrintBounds.y;
142:
143: }
144:
145: int footerH = params.getConfiguration()
146: .getPrintFooterHeight();
147: Rectangle printBounds = params.getPrintBounds();
148: int footerY = params.getPrintBounds().height - footerH;
149: int nbCols = params.getPrintCols();
150: if (drawSpreadsheet && !drawGantt) {
151: g.drawRect(0, 0, spreadsheetPrintBounds.width, /*spreadsheetPrintBounds.height+rowH*/
152: printBounds.height);
153: g.drawLine(0, rowH, spreadsheetPrintBounds.width, rowH);
154: g.drawLine(0, spreadsheetPrintBounds.height + rowH,
155: spreadsheetPrintBounds.width,
156: spreadsheetPrintBounds.height + rowH);
157: g.drawLine(0, footerY, spreadsheetPrintBounds.width,
158: footerY);
159: footerRenderer.paint(g, prow * nbCols + pcol,
160: new Rectangle(0, footerY,
161: spreadsheetPrintBounds.width, footerH),
162: project.getName());
163: } else if (!drawSpreadsheet && drawGantt) {
164: g.drawRect(0, 0, ganttPrintBounds.width,
165: printBounds.height);
166: g.drawLine(0, rowH, ganttPrintBounds.width, rowH);
167: g.drawLine(0, ganttPrintBounds.height + rowH,
168: ganttPrintBounds.width, ganttPrintBounds.height
169: + rowH);
170: g.drawLine(0, footerY, ganttPrintBounds.width, footerY);
171: footerRenderer.paint(g, prow * nbCols + pcol,
172: new Rectangle(0, footerY,
173: ganttPrintBounds.width, footerH),
174: project.getName());
175: } else if (drawSpreadsheet && drawGantt) {
176: g.drawRect(0, 0, spreadsheetPrintBounds.width
177: + ganttPrintBounds.width, printBounds.height);
178: g.drawLine(0, rowH, spreadsheetPrintBounds.width
179: + ganttPrintBounds.width, rowH);
180: g.drawLine(0, spreadsheetPrintBounds.height + rowH,
181: spreadsheetPrintBounds.width
182: + ganttPrintBounds.width,
183: spreadsheetPrintBounds.height + rowH);
184: g.drawLine(0, footerY, spreadsheetPrintBounds.width
185: + ganttPrintBounds.width, footerY);
186: footerRenderer.paint(g, prow * nbCols + pcol,
187: new Rectangle(0, footerY,
188: spreadsheetPrintBounds.width
189: + ganttPrintBounds.width,
190: footerH), project.getName());
191: }
192:
193: }
194:
195: if (drawSpreadsheet) {
196: spreadSheetRenderer.paint(g, prow, pcol);
197: }
198: if (drawGantt) {
199: g.translate(ganttX, 0);
200: if (ganttPrintBounds != null)
201: g.setClip(new Rectangle(ganttPrintBounds.x, 0,
202: ganttPrintBounds.width, rowH));
203: TimeScaleComponent.paintTimeScale(g, params, FontManager
204: .getOfflineDefaultFont());
205: if (ganttPrintBounds != null)
206: g.setClip(null);
207: g
208: .translate(0, ganttY
209: + params.getConfiguration()
210: .getColumnHeaderHeight());
211: if (ganttPrintBounds == null)
212: ganttRenderer.paint(g, null);
213: else
214: ganttRenderer.paint(g, new Rectangle(
215: ganttPrintBounds.x, ganttPrintBounds.y + 1,
216: ganttPrintBounds.width,
217: ganttPrintBounds.height - 1));//1 pixel offset needed for edge
218: }
219: }
220:
221: public Dimension getCanvasSize() {
222: return params.getDrawingBounds().getSize();
223: }
224:
225: public GraphParams getParams() {
226: return params;
227: }
228:
229: }
|