using System;
using System.IO;
using System.Runtime.CompilerServices;
using System.Threading;
namespace Tamir.Streams{
/*
* @(#)PipedInputStream.java 1.35 03/12/19
*
* Copyright 2004 Sun Microsystems, Inc. All rights reserved.
* SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
*/
/**
* A piped input stream should be connected
* to a piped output stream; the piped input
* stream then provides whatever data bytes
* are written to the piped output stream.
* Typically, data is read from a <code>PipedInputStream</code>
* object by one thread and data is written
* to the corresponding <code>PipedOutputStream</code>
* by some other thread. Attempting to use
* both objects from a single thread is not
* recommended, as it may deadlock the thread.
* The piped input stream contains a buffer,
* decoupling read operations from write operations,
* within limits.
*
* @author James Gosling
* @version 1.35, 12/19/03
* @see java.io.PipedOutputStream
* @since JDK1.0
*/
public class PipedInputStream : Tamir.SharpSsh.java.io.InputStream
{
internal bool closedByWriter = false;
internal volatile bool closedByReader = false;
internal bool connected = false;
/* REMIND: identification of the read and write sides needs to be
more sophisticated. Either using thread groups (but what about
pipes within a thread?) or using finalization (but it may be a
long time until the next GC). */
internal Thread readSide;
internal Thread writeSide;
/**
* The size of the pipe's circular input buffer.
* @since JDK1.1
*/
internal const int PIPE_SIZE = 1024;
/**
* The circular buffer into which incoming data is placed.
* @since JDK1.1
*/
internal byte[] buffer = new byte[PIPE_SIZE];
/**
* The index of the position in the circular buffer at which the
* next byte of data will be stored when received from the connected
* piped output stream. <code>in<0</code> implies the buffer is empty,
* <code>in==out</code> implies the buffer is full
* @since JDK1.1
*/
internal int m_in = -1;
/**
* The index of the position in the circular buffer at which the next
* byte of data will be read by this piped input stream.
* @since JDK1.1
*/
internal int m_out = 0;
/**
* Creates a <code>PipedInputStream</code> so
* that it is connected to the piped output
* stream <code>src</code>. Data bytes written
* to <code>src</code> will then be available
* as input from this stream.
*
* @param src the stream to connect to.
* @exception IOException if an I/O error occurs.
*/
public PipedInputStream(PipedOutputStream src)
{
connect(src);
}
/**
* Creates a <code>PipedInputStream</code> so
* that it is not yet connected. It must be
* connected to a <code>PipedOutputStream</code>
* before being used.
*
* @see java.io.PipedInputStream#connect(java.io.PipedOutputStream)
* @see java.io.PipedOutputStream#connect(java.io.PipedInputStream)
*/
public PipedInputStream()
{
int i = 0;
}
/**
* Causes this piped input stream to be connected
* to the piped output stream <code>src</code>.
* If this object is already connected to some
* other piped output stream, an <code>IOException</code>
* is thrown.
* <p>
* If <code>src</code> is an
* unconnected piped output stream and <code>snk</code>
* is an unconnected piped input stream, they
* may be connected by either the call:
* <p>
* <pre><code>snk.connect(src)</code> </pre>
* <p>
* or the call:
* <p>
* <pre><code>src.connect(snk)</code> </pre>
* <p>
* The two
* calls have the same effect.
*
* @param src The piped output stream to connect to.
* @exception IOException if an I/O error occurs.
*/
public virtual void connect(PipedOutputStream src)
{
src.connect(this);
}
/**
* Receives a byte of data. This method will block if no input is
* available.
* @param b the byte being received
* @exception IOException If the pipe is broken.
* @since JDK1.1
*/
[MethodImpl(MethodImplOptions.Synchronized)]
internal void receive(int b)
{
checkStateForReceive();
writeSide = Thread.CurrentThread;
if (m_in == m_out)
awaitSpace();
if (m_in < 0)
{
m_in = 0;
m_out = 0;
}
buffer[m_in++] = (byte)(b & 0xFF);
if (m_in >= buffer.Length)
{
m_in = 0;
}
}
/**
* Receives data into an array of bytes. This method will
* block until some input is available.
* @param b the buffer into which the data is received
* @param off the start offset of the data
* @param len the maximum number of bytes received
* @exception IOException If an I/O error has occurred.
*/
[MethodImpl(MethodImplOptions.Synchronized)]
internal void receive(byte[] b, int off, int len)
{
checkStateForReceive();
writeSide = Thread.CurrentThread;
int bytesToTransfer = len;
while (bytesToTransfer > 0)
{
if (m_in == m_out)
awaitSpace();
int nextTransferAmount = 0;
if (m_out < m_in)
{
nextTransferAmount = buffer.Length - m_in;
}
else if (m_in < m_out)
{
if (m_in == -1)
{
m_in = m_out = 0;
nextTransferAmount = buffer.Length - m_in;
}
else
{
nextTransferAmount = m_out - m_in;
}
}
if (nextTransferAmount > bytesToTransfer)
nextTransferAmount = bytesToTransfer;
assert(nextTransferAmount > 0);
Array.Copy(b, off, buffer, m_in, nextTransferAmount);
bytesToTransfer -= nextTransferAmount;
off += nextTransferAmount;
m_in += nextTransferAmount;
if (m_in >= buffer.Length)
{
m_in = 0;
}
}
}
private void checkStateForReceive()
{
if (!connected)
{
throw new IOException("Pipe not connected");
}
else if (closedByWriter || closedByReader)
{
throw new IOException("Pipe closed");
}
else if (readSide != null && !readSide.IsAlive)
{
throw new IOException("Read end dead");
}
}
private void awaitSpace()
{
while (m_in == m_out)
{
if ((readSide != null) && !readSide.IsAlive)
{
throw new IOException("Pipe broken");
}
/* full: kick any waiting readers */
//java: notifyAll();
Monitor.PulseAll(this);
try
{
//java: wait(1000);
Monitor.Wait(this, 1000);
}
catch (ThreadInterruptedException ex)
{
throw ex;
}
}
}
/**
* Notifies all waiting threads that the last byte of data has been
* received.
*/
[MethodImpl(MethodImplOptions.Synchronized)]
internal void receivedLast()
{
closedByWriter = true;
//notifyAll();
Monitor.PulseAll(this);
}
/**
* Reads the next byte of data from this piped input stream. The
* value byte is returned as an <code>int</code> in the range
* <code>0</code> to <code>255</code>. If no byte is available
* because the end of the stream has been reached, the value
* <code>-1</code> is returned. This method blocks until input data
* is available, the end of the stream is detected, or an exception
* is thrown.
* If a thread was providing data bytes
* to the connected piped output stream, but
* the thread is no longer alive, then an
* <code>IOException</code> is thrown.
*
* @return the next byte of data, or <code>-1</code> if the end of the
* stream is reached.
* @exception IOException if the pipe is broken.
*/
[MethodImpl(MethodImplOptions.Synchronized)]
public virtual int read()
{
if (!connected)
{
throw new IOException("Pipe not connected");
}
else if (closedByReader)
{
throw new IOException("Pipe closed");
}
else if (writeSide != null && !writeSide.IsAlive
&& !closedByWriter && (m_in < 0))
{
throw new IOException("Write end dead");
}
readSide = Thread.CurrentThread;
int trials = 2;
while (m_in < 0)
{
if (closedByWriter)
{
/* closed by writer, return EOF */
return -1;
}
if ((writeSide != null) && (!writeSide.IsAlive) && (--trials < 0))
{
throw new IOException("Pipe broken");
}
/* might be a writer waiting */
Monitor.PulseAll(this);
try
{
Monitor.Wait(this, 1000);
}
catch (ThreadInterruptedException ex)
{
throw ex;
}
}
int ret = buffer[m_out++] & 0xFF;
if (m_out >= buffer.Length)
{
m_out = 0;
}
if (m_in == m_out)
{
/* now empty */
m_in = -1;
}
return ret;
}
/**
* Reads up to <code>len</code> bytes of data from this piped input
* stream into an array of bytes. Less than <code>len</code> bytes
* will be read if the end of the data stream is reached. This method
* blocks until at least one byte of input is available.
* If a thread was providing data bytes
* to the connected piped output stream, but
* the thread is no longer alive, then an
* <code>IOException</code> is thrown.
*
* @param b the buffer into which the data is read.
* @param off the start offset of the data.
* @param len the maximum number of bytes read.
* @return the total number of bytes read into the buffer, or
* <code>-1</code> if there is no more data because the end of
* the stream has been reached.
* @exception IOException if an I/O error occurs.
*/
[MethodImpl(MethodImplOptions.Synchronized)]
public override int read(byte[] b, int off, int len)
{
if (b == null)
{
throw new NullReferenceException();
}
else if ((off < 0) || (off > b.Length) || (len < 0) ||
((off + len) > b.Length) || ((off + len) < 0))
{
throw new IndexOutOfRangeException();
}
else if (len == 0)
{
return 0;
}
/* possibly wait on the first character */
int c = read();
if (c < 0)
{
return -1;
}
b[off] = (byte) c;
int rlen = 1;
while ((m_in >= 0) && (--len > 0))
{
b[off + rlen] = buffer[m_out++];
rlen++;
if (m_out >= buffer.Length)
{
m_out = 0;
}
if (m_in == m_out)
{
/* now empty */
m_in = -1;
}
}
return rlen;
}
/**
* Returns the number of bytes that can be read from this input
* stream without blocking. This method overrides the <code>available</code>
* method of the parent class.
*
* @return the number of bytes that can be read from this input stream
* without blocking.
* @exception IOException if an I/O error occurs.
* @since JDK1.0.2
*/
[MethodImpl(MethodImplOptions.Synchronized)]
public virtual int available()
{
if(m_in < 0)
return 0;
else if(m_in == m_out)
return buffer.Length;
else if (m_in > m_out)
return m_in - m_out;
else
return m_in + buffer.Length - m_out;
}
/**
* Closes this piped input stream and releases any system resources
* associated with the stream.
*
* @exception IOException if an I/O error occurs.
*/
public override void close()
{
closedByReader = true;
lock (this)
{
m_in = -1;
}
}
private void assert(bool exp)
{
if (!exp)
throw new Exception("Assertion failed!");
}
///////////////////////////////////////
public override int Read(byte[] buffer, int offset, int count)
{
return this.read(buffer, offset, count);
}
public override int ReadByte()
{
return this.read();
}
public override void WriteByte(byte value)
{
}
public override void Write(byte[] buffer, int offset, int count)
{
}
public override void Close()
{
base.Close ();
this.close();
}
public override bool CanRead
{
get
{
return true;
}
}
public override bool CanWrite
{
get
{
return false;
}
}
public override bool CanSeek
{
get
{
return false;
}
}
public override void Flush()
{
}
public override long Length
{
get
{
if(m_in > m_out)
return (m_in - m_out);
else
{
return (buffer.Length -m_out+m_in);
}
}
}
public override long Position
{
get
{
return m_out;
}
set
{
throw new IOException("Setting the position of this stream is not supported");
}
}
public override void SetLength(long value)
{
throw new IOException("Setting the length of this stream is not supported");
}
public override long Seek(long offset, SeekOrigin origin)
{
return 0;
}
}
}
|