using System;
namespace Org.BouncyCastle.Math.EC.Multiplier{
/**
* Class implementing the WNAF (Window Non-Adjacent Form) multiplication
* algorithm.
*/
internal class WNafMultiplier
: ECMultiplier
{
/**
* Computes the Window NAF (non-adjacent Form) of an integer.
* @param width The width <code>w</code> of the Window NAF. The width is
* defined as the minimal number <code>w</code>, such that for any
* <code>w</code> consecutive digits in the resulting representation, at
* most one is non-zero.
* @param k The integer of which the Window NAF is computed.
* @return The Window NAF of the given width, such that the following holds:
* <code>k = −<sub>i=0</sub><sup>l-1</sup> k<sub>i</sub>2<sup>i</sup>
* </code>, where the <code>k<sub>i</sub></code> denote the elements of the
* returned <code>sbyte[]</code>.
*/
public sbyte[] WindowNaf(sbyte width, BigInteger k)
{
// The window NAF is at most 1 element longer than the binary
// representation of the integer k. sbyte can be used instead of short or
// int unless the window width is larger than 8. For larger width use
// short or int. However, a width of more than 8 is not efficient for
// m = log2(q) smaller than 2305 Bits. Note: Values for m larger than
// 1000 Bits are currently not used in practice.
sbyte[] wnaf = new sbyte[k.BitLength + 1];
// 2^width as short and BigInteger
short pow2wB = (short)(1 << width);
BigInteger pow2wBI = BigInteger.ValueOf(pow2wB);
int i = 0;
// The actual length of the WNAF
int length = 0;
// while k >= 1
while (k.SignValue > 0)
{
// if k is odd
if (k.TestBit(0))
{
// k Mod 2^width
BigInteger remainder = k.Mod(pow2wBI);
// if remainder > 2^(width - 1) - 1
if (remainder.TestBit(width - 1))
{
wnaf[i] = (sbyte)(remainder.IntValue - pow2wB);
}
else
{
wnaf[i] = (sbyte)remainder.IntValue;
}
// wnaf[i] is now in [-2^(width-1), 2^(width-1)-1]
k = k.Subtract(BigInteger.ValueOf(wnaf[i]));
length = i;
}
else
{
wnaf[i] = 0;
}
// k = k/2
k = k.ShiftRight(1);
i++;
}
length++;
// Reduce the WNAF array to its actual length
sbyte[] wnafShort = new sbyte[length];
Array.Copy(wnaf, 0, wnafShort, 0, length);
return wnafShort;
}
/**
* Multiplies <code>this</code> by an integer <code>k</code> using the
* Window NAF method.
* @param k The integer by which <code>this</code> is multiplied.
* @return A new <code>ECPoint</code> which equals <code>this</code>
* multiplied by <code>k</code>.
*/
public ECPoint Multiply(ECPoint p, BigInteger k, PreCompInfo preCompInfo)
{
WNafPreCompInfo wnafPreCompInfo;
if ((preCompInfo != null) && (preCompInfo is WNafPreCompInfo))
{
wnafPreCompInfo = (WNafPreCompInfo)preCompInfo;
}
else
{
// Ignore empty PreCompInfo or PreCompInfo of incorrect type
wnafPreCompInfo = new WNafPreCompInfo();
}
// floor(log2(k))
int m = k.BitLength;
// width of the Window NAF
sbyte width;
// Required length of precomputation array
int reqPreCompLen;
// Determine optimal width and corresponding length of precomputation
// array based on literature values
if (m < 13)
{
width = 2;
reqPreCompLen = 1;
}
else
{
if (m < 41)
{
width = 3;
reqPreCompLen = 2;
}
else
{
if (m < 121)
{
width = 4;
reqPreCompLen = 4;
}
else
{
if (m < 337)
{
width = 5;
reqPreCompLen = 8;
}
else
{
if (m < 897)
{
width = 6;
reqPreCompLen = 16;
}
else
{
if (m < 2305)
{
width = 7;
reqPreCompLen = 32;
}
else
{
width = 8;
reqPreCompLen = 127;
}
}
}
}
}
}
// The length of the precomputation array
int preCompLen = 1;
ECPoint[] preComp = wnafPreCompInfo.GetPreComp();
ECPoint twiceP = wnafPreCompInfo.GetTwiceP();
// Check if the precomputed ECPoints already exist
if (preComp == null)
{
// Precomputation must be performed from scratch, create an empty
// precomputation array of desired length
preComp = new ECPoint[]{ p };
}
else
{
// Take the already precomputed ECPoints to start with
preCompLen = preComp.Length;
}
if (twiceP == null)
{
// Compute twice(p)
twiceP = p.Twice();
}
if (preCompLen < reqPreCompLen)
{
// Precomputation array must be made bigger, copy existing preComp
// array into the larger new preComp array
ECPoint[] oldPreComp = preComp;
preComp = new ECPoint[reqPreCompLen];
Array.Copy(oldPreComp, 0, preComp, 0, preCompLen);
for (int i = preCompLen; i < reqPreCompLen; i++)
{
// Compute the new ECPoints for the precomputation array.
// The values 1, 3, 5, ..., 2^(width-1)-1 times p are
// computed
preComp[i] = twiceP.Add(preComp[i - 1]);
}
}
// Compute the Window NAF of the desired width
sbyte[] wnaf = WindowNaf(width, k);
int l = wnaf.Length;
// Apply the Window NAF to p using the precomputed ECPoint values.
ECPoint q = p.Curve.Infinity;
for (int i = l - 1; i >= 0; i--)
{
q = q.Twice();
if (wnaf[i] != 0)
{
if (wnaf[i] > 0)
{
q = q.Add(preComp[(wnaf[i] - 1)/2]);
}
else
{
// wnaf[i] < 0
q = q.Subtract(preComp[(-wnaf[i] - 1)/2]);
}
}
}
// Set PreCompInfo in ECPoint, such that it is available for next
// multiplication.
wnafPreCompInfo.SetPreComp(preComp);
wnafPreCompInfo.SetTwiceP(twiceP);
p.SetPreCompInfo(wnafPreCompInfo);
return q;
}
}
}
|