Java Doc for GregorianCalendar.java in  » 6.0-JDK-Core » Collections-Jar-Zip-Logging-regex » java » util » Java Source Code / Java DocumentationJava Source Code and Java Documentation

GregorianCalendar is a hybrid calendar that supports both the Julian and Gregorian calendar systems with the support of a single discontinuity, which corresponds by default to the Gregorian date when the Gregorian calendar was instituted (October 15, 1582 in some countries, later in others). The cutover date may be changed by the caller by calling GregorianCalendar.setGregorianChange(Date) setGregorianChange() .

Historically, in those countries which adopted the Gregorian calendar first, October 4, 1582 (Julian) was thus followed by October 15, 1582 (Gregorian). This calendar models this correctly. Before the Gregorian cutover, GregorianCalendar implements the Julian calendar. The only difference between the Gregorian and the Julian calendar is the leap year rule. The Julian calendar specifies leap years every four years, whereas the Gregorian calendar omits century years which are not divisible by 400.

GregorianCalendar implements proleptic Gregorian and Julian calendars. That is, dates are computed by extrapolating the current rules indefinitely far backward and forward in time. As a result, GregorianCalendar may be used for all years to generate meaningful and consistent results. However, dates obtained using GregorianCalendar are historically accurate only from March 1, 4 AD onward, when modern Julian calendar rules were adopted. Before this date, leap year rules were applied irregularly, and before 45 BC the Julian calendar did not even exist.

Prior to the institution of the Gregorian calendar, New Year's Day was March 25. To avoid confusion, this calendar always uses January 1. A manual adjustment may be made if desired for dates that are prior to the Gregorian changeover and which fall between January 1 and March 24.

Values calculated for the WEEK_OF_YEAR field range from 1 to 53. Week 1 for a year is the earliest seven day period starting on getFirstDayOfWeek() that contains at least getMinimalDaysInFirstWeek() days from that year. It thus depends on the values of getMinimalDaysInFirstWeek(), getFirstDayOfWeek(), and the day of the week of January 1. Weeks between week 1 of one year and week 1 of the following year are numbered sequentially from 2 to 52 or 53 (as needed).

For example, January 1, 1998 was a Thursday. If getFirstDayOfWeek() is MONDAY and getMinimalDaysInFirstWeek() is 4 (these are the values reflecting ISO 8601 and many national standards), then week 1 of 1998 starts on December 29, 1997, and ends on January 4, 1998. If, however, getFirstDayOfWeek() is SUNDAY, then week 1 of 1998 starts on January 4, 1998, and ends on January 10, 1998; the first three days of 1998 then are part of week 53 of 1997.

Values calculated for the WEEK_OF_MONTH field range from 0 to 6. Week 1 of a month (the days with WEEK_OF_MONTH = 1) is the earliest set of at least getMinimalDaysInFirstWeek() contiguous days in that month, ending on the day before getFirstDayOfWeek(). Unlike week 1 of a year, week 1 of a month may be shorter than 7 days, need not start on getFirstDayOfWeek(), and will not include days of the previous month. Days of a month before week 1 have a WEEK_OF_MONTH of 0.

For example, if getFirstDayOfWeek() is SUNDAY and getMinimalDaysInFirstWeek() is 4, then the first week of January 1998 is Sunday, January 4 through Saturday, January 10. These days have a WEEK_OF_MONTH of 1. Thursday, January 1 through Saturday, January 3 have a WEEK_OF_MONTH of 0. If getMinimalDaysInFirstWeek() is changed to 3, then January 1 through January 3 have a WEEK_OF_MONTH of 1.

The clear methods set calendar field(s) undefined. GregorianCalendar uses the following default value for each calendar field if its value is undefined.

Field	Default Value
ERA	AD
YEAR	1970
MONTH	JANUARY
DAY_OF_MONTH	1
DAY_OF_WEEK	the first day of week
WEEK_OF_MONTH	0
DAY_OF_WEEK_IN_MONTH	1
AM_PM	AM
HOUR, HOUR_OF_DAY, MINUTE, SECOND, MILLISECOND	0

Default values are not applicable for the fields not listed above.

Example:

 // get the supported ids for GMT-08:00 (Pacific Standard Time)
 String[] ids = TimeZone.getAvailableIDs(-8 * 60 * 60 * 1000);
 // if no ids were returned, something is wrong. get out.
 if (ids.length == 0)
 System.exit(0);
 // begin output
 System.out.println("Current Time");
 // create a Pacific Standard Time time zone
 SimpleTimeZone pdt = new SimpleTimeZone(-8 * 60 * 60 * 1000, ids[0]);
 // set up rules for daylight savings time
 pdt.setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
 pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
 // create a GregorianCalendar with the Pacific Daylight time zone
 // and the current date and time
 Calendar calendar = new GregorianCalendar(pdt);
 Date trialTime = new Date();
 calendar.setTime(trialTime);
 // print out a bunch of interesting things
 System.out.println("ERA: " + calendar.get(Calendar.ERA));
 System.out.println("YEAR: " + calendar.get(Calendar.YEAR));
 System.out.println("MONTH: " + calendar.get(Calendar.MONTH));
 System.out.println("WEEK_OF_YEAR: " + calendar.get(Calendar.WEEK_OF_YEAR));
 System.out.println("WEEK_OF_MONTH: " + calendar.get(Calendar.WEEK_OF_MONTH));
 System.out.println("DATE: " + calendar.get(Calendar.DATE));
 System.out.println("DAY_OF_MONTH: " + calendar.get(Calendar.DAY_OF_MONTH));
 System.out.println("DAY_OF_YEAR: " + calendar.get(Calendar.DAY_OF_YEAR));
 System.out.println("DAY_OF_WEEK: " + calendar.get(Calendar.DAY_OF_WEEK));
 System.out.println("DAY_OF_WEEK_IN_MONTH: "
 + calendar.get(Calendar.DAY_OF_WEEK_IN_MONTH));
 System.out.println("AM_PM: " + calendar.get(Calendar.AM_PM));
 System.out.println("HOUR: " + calendar.get(Calendar.HOUR));
 System.out.println("HOUR_OF_DAY: " + calendar.get(Calendar.HOUR_OF_DAY));
 System.out.println("MINUTE: " + calendar.get(Calendar.MINUTE));
 System.out.println("SECOND: " + calendar.get(Calendar.SECOND));
 System.out.println("MILLISECOND: " + calendar.get(Calendar.MILLISECOND));
 System.out.println("ZONE_OFFSET: "
 + (calendar.get(Calendar.ZONE_OFFSET)/(60*60*1000)));
 System.out.println("DST_OFFSET: "
 + (calendar.get(Calendar.DST_OFFSET)/(60*60*1000)));
 System.out.println("Current Time, with hour reset to 3");
 calendar.clear(Calendar.HOUR_OF_DAY); // so doesn't override
 calendar.set(Calendar.HOUR, 3);
 System.out.println("ERA: " + calendar.get(Calendar.ERA));
 System.out.println("YEAR: " + calendar.get(Calendar.YEAR));
 System.out.println("MONTH: " + calendar.get(Calendar.MONTH));
 System.out.println("WEEK_OF_YEAR: " + calendar.get(Calendar.WEEK_OF_YEAR));
 System.out.println("WEEK_OF_MONTH: " + calendar.get(Calendar.WEEK_OF_MONTH));
 System.out.println("DATE: " + calendar.get(Calendar.DATE));
 System.out.println("DAY_OF_MONTH: " + calendar.get(Calendar.DAY_OF_MONTH));
 System.out.println("DAY_OF_YEAR: " + calendar.get(Calendar.DAY_OF_YEAR));
 System.out.println("DAY_OF_WEEK: " + calendar.get(Calendar.DAY_OF_WEEK));
 System.out.println("DAY_OF_WEEK_IN_MONTH: "
 + calendar.get(Calendar.DAY_OF_WEEK_IN_MONTH));
 System.out.println("AM_PM: " + calendar.get(Calendar.AM_PM));
 System.out.println("HOUR: " + calendar.get(Calendar.HOUR));
 System.out.println("HOUR_OF_DAY: " + calendar.get(Calendar.HOUR_OF_DAY));
 System.out.println("MINUTE: " + calendar.get(Calendar.MINUTE));
 System.out.println("SECOND: " + calendar.get(Calendar.SECOND));
 System.out.println("MILLISECOND: " + calendar.get(Calendar.MILLISECOND));
 System.out.println("ZONE_OFFSET: "
 + (calendar.get(Calendar.ZONE_OFFSET)/(60*60*1000))); // in hours
 System.out.println("DST_OFFSET: "
 + (calendar.get(Calendar.DST_OFFSET)/(60*60*1000))); // in hours
 

Add rule 1.

For example, if the Gregorian change date is January 10, 1970 and the date of this GregorianCalendar is January 20, 1970, the actual minimum value of the DAY_OF_MONTH field is 10 because the previous date of January 10, 1970 is December 27, 1996 (in the Julian calendar).

Add rule 1. The value of field after the call minus the value of field before the call is amount, modulo any overflow that has occurred in field. Overflow occurs when a field value exceeds its range and, as a result, the next larger field is incremented or decremented and the field value is adjusted back into its range.

Add rule 2. If a smaller field is expected to be invariant, but it is impossible for it to be equal to its prior value because of changes in its minimum or maximum after field is changed, then its value is adjusted to be as close as possible to its expected value. A smaller field represents a smaller unit of time. HOUR is a smaller field than DAY_OF_MONTH. No adjustment is made to smaller fields that are not expected to be invariant. The calendar system determines what fields are expected to be invariant.

For example, if the Gregorian change date is January 10, 1970 and the date of this GregorianCalendar is January 20, 1970, the actual minimum value of the DAY_OF_MONTH field is 10 because the previous date of January 10, 1970 is December 27, 1996 (in the Julian calendar). Therefore, December 28, 1969 to January 9, 1970 don't exist.
Parameters:
  field - the calendar field the minimum of the given field for the time value ofthis GregorianCalendar
See Also:   GregorianCalendar.getMinimum(int)
See Also:   GregorianCalendar.getMaximum(int)
See Also:   GregorianCalendar.getGreatestMinimum(int)
See Also:   GregorianCalendar.getLeastMaximum(int)
See Also:   GregorianCalendar.getActualMaximum(int)
since:
   1.2

Example: Consider a GregorianCalendar originally set to December 31, 1999. Calling GregorianCalendar.roll(int,boolean) roll(Calendar.MONTH, true) sets the calendar to January 31, 1999. The YEAR field is unchanged because it is a larger field than MONTH.

This method calls GregorianCalendar.complete() before adding the amount so that all the calendar fields are normalized. If there is any calendar field having an out-of-range value in non-lenient mode, then an IllegalArgumentException is thrown.

Example: Consider a GregorianCalendar originally set to August 31, 1999. Calling roll(Calendar.MONTH, 8) sets the calendar to April 30, 1999. Using a GregorianCalendar, the DAY_OF_MONTH field cannot be 31 in the month April. DAY_OF_MONTH is set to the closest possible value, 30. The YEAR field maintains the value of 1999 because it is a larger field than MONTH.

Example: Consider a GregorianCalendar originally set to Sunday June 6, 1999. Calling roll(Calendar.WEEK_OF_MONTH, -1) sets the calendar to Tuesday June 1, 1999, whereas calling add(Calendar.WEEK_OF_MONTH, -1) sets the calendar to Sunday May 30, 1999. This is because the roll rule imposes an additional constraint: The MONTH must not change when the WEEK_OF_MONTH is rolled. Taken together with add rule 1, the resultant date must be between Tuesday June 1 and Saturday June 5. According to add rule 2, the DAY_OF_WEEK, an invariant when changing the WEEK_OF_MONTH, is set to Tuesday, the closest possible value to Sunday (where Sunday is the first day of the week).

To obtain a pure Julian calendar, set the change date to Date(Long.MAX_VALUE). To obtain a pure Gregorian calendar, set the change date to Date(Long.MIN_VALUE).
Parameters:
  date - the given Gregorian cutover date.