| java.lang.Object
 java.awt.Graphics
All known Subclasses: java.awt.Graphics2D, sun.awt.NullGraphics, java.awt.X11Graphics,
| Graphics | | abstract public class Graphics (Code) | | The Graphics class is the abstract base class for
all graphics contexts that allow an application to draw onto
components that are realized on various devices, as well as
onto off-screen images.
A Graphics object encapsulates state information needed
for the basic rendering operations that Java supports. This
state information includes the following properties:
- The
Component object on which to draw.
- A translation origin for rendering and clipping coordinates.
- The current clip.
- The current color.
- The current font.
- The current logical pixel operation function (XOR or Paint).
- The current XOR alternation color
(see
setXORMode).
Coordinates are infinitely thin and lie between the pixels of the
output device.
Operations which draw the outline of a figure operate by traversing
an infinitely thin path between pixels with a pixel-sized pen that hangs
down and to the right of the anchor point on the path.
Operations which fill a figure operate by filling the interior
of that infinitely thin path.
Operations which render horizontal text render the ascending
portion of character glyphs entirely above the baseline coordinate.
The graphics pen hangs down and to the right from the path it traverses.
This has the following implications:
- If you draw a figure that covers a given rectangle, that
figure occupies one extra row of pixels on the right and bottom edges
as compared to filling a figure that is bounded by that same rectangle.
- If you draw a horizontal line along the same y coordinate as
the baseline of a line of text, that line is drawn entirely below
the text, except for any descenders.
All coordinates which appear as arguments to the methods of this
Graphics object are considered relative to the
translation origin of this Graphics object prior to
the invocation of the method.
All rendering operations modify only pixels which lie within the
area bounded by both the current clip of the graphics context
and the extents of the component used to create the
Graphics object.
All drawing or writing is done in the current color,
using the current paint mode, and in the current font.
Compatibility
The Graphics class is compatible with the graphics class in
PersonalJava. It has modified behavior from JDK1.1.8, in that
its setXorMode may not have any effect.
version:
1.46, 03/12/01
author:
Sami Shaio
author:
Arthur van Hoff
See Also: java.awt.Component
See Also: java.awt.Graphics.clipRect(intintintint)
See Also: java.awt.Graphics.setColor(java.awt.Color)
See Also: java.awt.Graphics.setPaintMode
See Also: java.awt.Graphics.setXORMode(java.awt.Color)
See Also: java.awt.Graphics.setFont(java.awt.Font)
since:
JDK1.0 |
| Constructor Summary | |
| protected | Graphics()
Constructs a new Graphics object. |
| Method Summary | |
| abstract public void | clearRect(int x, int y, int width, int height)
Clears the specified rectangle by filling it with the background
color of the current drawing surface. | | abstract public void | clipRect(int x, int y, int width, int height)
Intersects the current clip with the specified rectangle. | | abstract public void | copyArea(int x, int y, int width, int height, int dx, int dy)
Copies an area of the component by a distance specified by
dx and dy. | | abstract public Graphics | create()
Creates a new Graphics object that is
a copy of this Graphics object. | | public Graphics | create(int x, int y, int width, int height)
Creates a new Graphics object based on this
Graphics object, but with a new translation and clip area.
The new Graphics object has its origin
translated to the specified point (x, y). | | abstract public void | dispose()
Disposes of this graphics context and releases
any system resources that it is using. | | public void | draw3DRect(int x, int y, int width, int height, boolean raised)
Draws a 3-D highlighted outline of the specified rectangle. | | abstract public void | drawArc(int x, int y, int width, int height, int startAngle, int arcAngle)
Draws the outline of a circular or elliptical arc
covering the specified rectangle.
The resulting arc begins at startAngle and extends
for arcAngle degrees, using the current color.
Angles are interpreted such that 0 degrees
is at the 3 o'clock position. | | public void | drawBytes(byte data, int offset, int length, int x, int y)
Draws the text given by the specified byte array, using this
graphics context's current font and color. | | public void | drawChars(char data, int offset, int length, int x, int y)
Draws the text given by the specified character array, using this
graphics context's current font and color. | | abstract public boolean | drawImage(Image img, int x, int y, ImageObserver observer)
Draws as much of the specified image as is currently available.
The image is drawn with its top-left corner at
(x, y) in this graphics context's coordinate
space. | | abstract public boolean | drawImage(Image img, int x, int y, int width, int height, ImageObserver observer)
Draws as much of the specified image as has already been scaled
to fit inside the specified rectangle.
The image is drawn inside the specified rectangle of this
graphics context's coordinate space, and is scaled if
necessary. | | abstract public boolean | drawImage(Image img, int x, int y, Color bgcolor, ImageObserver observer)
Draws as much of the specified image as is currently available.
The image is drawn with its top-left corner at
(x, y) in this graphics context's coordinate
space. | | abstract public boolean | drawImage(Image img, int x, int y, int width, int height, Color bgcolor, ImageObserver observer)
Draws as much of the specified image as has already been scaled
to fit inside the specified rectangle.
The image is drawn inside the specified rectangle of this
graphics context's coordinate space, and is scaled if
necessary. | | abstract public boolean | drawImage(Image img, int dx1, int dy1, int dx2, int dy2, int sx1, int sy1, int sx2, int sy2, ImageObserver observer)
Draws as much of the specified area of the specified image as is
currently available, scaling it on the fly to fit inside the
specified area of the destination drawable surface. | | abstract public boolean | drawImage(Image img, int dx1, int dy1, int dx2, int dy2, int sx1, int sy1, int sx2, int sy2, Color bgcolor, ImageObserver observer)
Draws as much of the specified area of the specified image as is
currently available, scaling it on the fly to fit inside the
specified area of the destination drawable surface. | | abstract public void | drawLine(int x1, int y1, int x2, int y2)
Draws a line, using the current color, between the points
(x1, y1) and (x2, y2)
in this graphics context's coordinate system. | | abstract public void | drawOval(int x, int y, int width, int height)
Draws the outline of an oval.
The result is a circle or ellipse that fits within the
rectangle specified by the x, y,
width, and height arguments. | | abstract public void | drawPolygon(int xPoints, int yPoints, int nPoints)
Draws a closed polygon defined by
arrays of x and y coordinates. | | public void | drawPolygon(Polygon p)
Draws the outline of a polygon defined by the specified
Polygon object. | | abstract public void | drawPolyline(int xPoints, int yPoints, int nPoints)
Draws a sequence of connected lines defined by
arrays of x and y coordinates. | | public void | drawRect(int x, int y, int width, int height)
Draws the outline of the specified rectangle. | | abstract public void | drawRoundRect(int x, int y, int width, int height, int arcWidth, int arcHeight)
Draws an outlined round-cornered rectangle using this graphics
context's current color. | | abstract public void | drawString(AttributedCharacterIterator iterator, int x, int y)
| | abstract public void | drawString(String str, int x, int y)
Draws the text given by the specified string, using this
graphics context's current font and color. | | public void | fill3DRect(int x, int y, int width, int height, boolean raised)
Paints a 3-D highlighted rectangle filled with the current color. | | abstract public void | fillArc(int x, int y, int width, int height, int startAngle, int arcAngle)
Fills a circular or elliptical arc covering the specified rectangle.
The resulting arc begins at startAngle and extends
for arcAngle degrees.
Angles are interpreted such that 0 degrees
is at the 3 o'clock position. | | abstract public void | fillOval(int x, int y, int width, int height)
Fills an oval bounded by the specified rectangle with the
current color. | | abstract public void | fillPolygon(int xPoints, int yPoints, int nPoints)
Fills a closed polygon defined by
arrays of x and y coordinates. | | public void | fillPolygon(Polygon p)
Fills the polygon defined by the specified Polygon object with
the graphics context's current color. | | abstract public void | fillRect(int x, int y, int width, int height)
Fills the specified rectangle. | | abstract public void | fillRoundRect(int x, int y, int width, int height, int arcWidth, int arcHeight)
Fills the specified rounded corner rectangle with the current color.
The left and right edges of the rectangle
are at x and x + width - 1,
respectively. | | public void | finalize()
Disposes of this graphics context once it is no longer referenced. | | abstract public Shape | getClip()
Gets the current clipping area. | | abstract public Rectangle | getClipBounds()
Returns the bounding rectangle of the current clipping area. | | public Rectangle | getClipBounds(Rectangle r)
Returns the bounding rectangle of the current clipping area.
The coordinates in the rectangle are relative to the coordinate
system origin of this graphics context. | | public Rectangle | getClipRect()
| | abstract public Color | getColor()
Gets this graphics context's current color. | | abstract public Font | getFont()
Gets the current font. | | public FontMetrics | getFontMetrics()
Gets the font metrics of the current font. | | abstract public FontMetrics | getFontMetrics(Font f)
Gets the font metrics for the specified font. | | public boolean | hitClip(int x, int y, int width, int height)
Returns true if the specified rectangular area intersects
the bounding rectangle of the current clipping area. | | abstract public void | setClip(int x, int y, int width, int height)
Sets the current clip to the rectangle specified by the given
coordinates. | | abstract public void | setClip(Shape clip)
Sets the current clipping area to an arbitrary clip shape.
Not all objects which implement the Shape
interface can be used to set the clip. | | abstract public void | setColor(Color c)
Sets this graphics context's current color to the specified
color. | | abstract public void | setFont(Font font)
Sets this graphics context's font to the specified font. | | abstract public void | setPaintMode()
Sets the paint mode of this graphics context to overwrite the
destination with this graphics context's current color. | | abstract public void | setXORMode(Color c1)
This method sets the graphics context to xor paint mode using
the "exclusive or" color xorcolor.
This specifies that logical pixel operations are performed in the
XOR mode, which alternates pixels between the current color and
a specified XOR color. | | public String | toString()
Returns a String object representing this
Graphics object's value. | | abstract public void | translate(int x, int y)
Translates the origin of the graphics context to the point
(x, y) in the current coordinate system. |
| Graphics | | protected Graphics()(Code) | | Constructs a new Graphics object.
This constructor is the default contructor for a graphics
context.
Since Graphics is an abstract class, applications
cannot call this constructor directly. Graphics contexts are
obtained from other graphics contexts or are created by calling
getGraphics on a component.
See Also: java.awt.Graphics.create
See Also: java.awt.Component.getGraphics
since:
JDK1.0 |
| clipRect | | abstract public void clipRect(int x, int y, int width, int height)(Code) | | Intersects the current clip with the specified rectangle.
The resulting clipping area is the intersection of the current
clipping area and the specified rectangle.
This method can only be used to make the current clip smaller.
To set the current clip larger, use any of the setClip methods.
Rendering operations have no effect outside of the clipping area.
Parameters:
x - the x coordinate of the rectangle to intersect the clip with
Parameters:
y - the y coordinate of the rectangle to intersect the clip with
Parameters:
width - the width of the rectangle to intersect the clip with
Parameters:
height - the height of the rectangle to intersect the clip with
See Also: Graphics.setClip(int,int,int,int)
See Also: Graphics.setClip(Shape) |
| copyArea | | abstract public void copyArea(int x, int y, int width, int height, int dx, int dy)(Code) | | Copies an area of the component by a distance specified by
dx and dy. From the point specified
by x and y, this method
copies downwards and to the right. To copy an area of the
component to the left or upwards, specify a negative value for
dx or dy.
If a portion of the source rectangle lies outside the bounds
of the component, or is obscured by another window or component,
copyArea will be unable to copy the associated
pixels. The area that is omitted can be refreshed by calling
the component's paint method.
Parameters:
x - the x coordinate of the source rectangle.
Parameters:
y - the y coordinate of the source rectangle.
Parameters:
width - the width of the source rectangle.
Parameters:
height - the height of the source rectangle.
Parameters:
dx - the horizontal distance to copy the pixels.
Parameters:
dy - the vertical distance to copy the pixels.
since:
JDK1.0 |
| create | | abstract public Graphics create()(Code) | | Creates a new Graphics object that is
a copy of this Graphics object.
a new graphics context that is a copy of this graphics context.
since:
JDK1.0 |
| create | | public Graphics create(int x, int y, int width, int height)(Code) | | Creates a new Graphics object based on this
Graphics object, but with a new translation and clip area.
The new Graphics object has its origin
translated to the specified point (x, y).
Its clip area is determined by the intersection of the original
clip area with the specified rectangle. The arguments are all
interpreted in the coordinate system of the original
Graphics object. The new graphics context is
identical to the original, except in two respects:
-
The new graphics context is translated by (x, y).
That is to say, the point (
0, 0) in the
new graphics context is the same as (x, y) in
the original graphics context.
-
The new graphics context has an additional clipping rectangle, in
addition to whatever (translated) clipping rectangle it inherited
from the original graphics context. The origin of the new clipping
rectangle is at (
0, 0), and its size
is specified by the width and height arguments.
Parameters:
x - the x coordinate.
Parameters:
y - the y coordinate.
Parameters:
width - the width of the clipping rectangle.
Parameters:
height - the height of the clipping rectangle. a new graphics context.
See Also: java.awt.Graphics.translate
See Also: java.awt.Graphics.clipRect
since:
JDK1.0 |
| dispose | | abstract public void dispose()(Code) | | Disposes of this graphics context and releases
any system resources that it is using.
A Graphics object cannot be used after
disposehas been called.
When a Java program runs, a large number of Graphics
objects can be created within a short time frame.
Although the finalization process of the garbage collector
also disposes of the same system resources, it is preferable
to manually free the associated resources by calling this
method rather than to rely on a finalization process which
may not run to completion for a long period of time.
Graphics objects which are provided as arguments to the
paint and update methods
of components are automatically released by the system when
those methods return. For efficiency, programmers should
call dispose when finished using
a Graphics object only if it was created
directly from a component or another Graphics object.
See Also: java.awt.Graphics.finalize
See Also: java.awt.Component.paint
See Also: java.awt.Component.update
See Also: java.awt.Component.getGraphics
See Also: java.awt.Graphics.create
since:
JDK1.0 |
| draw3DRect | | public void draw3DRect(int x, int y, int width, int height, boolean raised)(Code) | | Draws a 3-D highlighted outline of the specified rectangle.
The edges of the rectangle are highlighted so that they
appear to be beveled and lit from the upper left corner.
The colors used for the highlighting effect are determined
based on the current color.
The resulting rectangle covers an area that is
width + 1 pixels wide
by height + 1 pixels tall.
Parameters:
x - the x coordinate of the rectangle to be drawn.
Parameters:
y - the y coordinate of the rectangle to be drawn.
Parameters:
width - the width of the rectangle to be drawn.
Parameters:
height - the height of the rectangle to be drawn.
Parameters:
raised - a boolean that determines whether the rectangleappears to be raised above the surface or sunk into the surface.
See Also: java.awt.Graphics.fill3DRect
since:
JDK1.0 |
| drawArc | | abstract public void drawArc(int x, int y, int width, int height, int startAngle, int arcAngle)(Code) | | Draws the outline of a circular or elliptical arc
covering the specified rectangle.
The resulting arc begins at startAngle and extends
for arcAngle degrees, using the current color.
Angles are interpreted such that 0 degrees
is at the 3 o'clock position.
A positive value indicates a counter-clockwise rotation
while a negative value indicates a clockwise rotation.
The center of the arc is the center of the rectangle whose origin
is (x, y) and whose size is specified by the
width and height arguments.
The resulting arc covers an area
width + 1 pixels wide
by height + 1 pixels tall.
Parameters:
x - the x coordinate of the upper-left corner of the arc to be drawn.
Parameters:
y - the y coordinate of the upper-left corner of the arc to be drawn.
Parameters:
width - the width of the arc to be drawn.
Parameters:
height - the height of the arc to be drawn.
Parameters:
startAngle - the beginning angle.
Parameters:
arcAngle - the angular extent of the arc, relative to the start angle.
See Also: java.awt.Graphics.fillArc
since:
JDK1.0 |
| drawBytes | | public void drawBytes(byte data, int offset, int length, int x, int y)(Code) | | Draws the text given by the specified byte array, using this
graphics context's current font and color. The baseline of the
first character is at position (x, y) in this
graphics context's coordinate system.
Parameters:
data - the data to be drawn
Parameters:
offset - the start offset in the data
Parameters:
length - the number of bytes that are drawn
Parameters:
x - the x coordinate of the baseline of the text
Parameters:
y - the y coordinate of the baseline of the text
See Also: java.awt.Graphics.drawChars
See Also: java.awt.Graphics.drawString
since:
JDK1.0 |
| drawChars | | public void drawChars(char data, int offset, int length, int x, int y)(Code) | | Draws the text given by the specified character array, using this
graphics context's current font and color. The baseline of the
first character is at position (x, y) in this
graphics context's coordinate system.
Parameters:
data - the array of characters to be drawn
Parameters:
offset - the start offset in the data
Parameters:
length - the number of characters to be drawn
Parameters:
x - the x coordinate of the baseline of the text
Parameters:
y - the y coordinate of the baseline of the text
See Also: java.awt.Graphics.drawBytes
See Also: java.awt.Graphics.drawString
since:
JDK1.0 |
| drawImage | | abstract public boolean drawImage(Image img, int x, int y, ImageObserver observer)(Code) | | Draws as much of the specified image as is currently available.
The image is drawn with its top-left corner at
(x, y) in this graphics context's coordinate
space. Transparent pixels in the image do not affect whatever
pixels are already there.
This method returns immediately in all cases, even if the
complete image has not yet been loaded, and it has not been dithered
and converted for the current output device.
If the image has not yet been completely loaded, then
drawImage returns false. As more of
the image becomes available, the process that draws the image notifies
the specified image observer.
Parameters:
img - the specified image to be drawn.
Parameters:
x - the x coordinate.
Parameters:
y - the y coordinate.
Parameters:
observer - object to be notified as more of the image is converted.
See Also: java.awt.Image
See Also: java.awt.image.ImageObserver
See Also: java.awt.image.ImageObserver.imageUpdate(java.awt.Imageintintintintint)
since:
JDK1.0 |
| drawImage | | abstract public boolean drawImage(Image img, int x, int y, int width, int height, ImageObserver observer)(Code) | | Draws as much of the specified image as has already been scaled
to fit inside the specified rectangle.
The image is drawn inside the specified rectangle of this
graphics context's coordinate space, and is scaled if
necessary. Transparent pixels do not affect whatever pixels
are already there.
This method returns immediately in all cases, even if the
entire image has not yet been scaled, dithered, and converted
for the current output device.
If the current output representation is not yet complete, then
drawImage returns false. As more of
the image becomes available, the process that draws the image notifies
the image observer by calling its imageUpdate method.
A scaled version of an image will not necessarily be
available immediately just because an unscaled version of the
image has been constructed for this output device. Each size of
the image may be cached separately and generated from the original
data in a separate image production sequence.
Parameters:
img - the specified image to be drawn.
Parameters:
x - the x coordinate.
Parameters:
y - the y coordinate.
Parameters:
width - the width of the rectangle.
Parameters:
height - the height of the rectangle.
Parameters:
observer - object to be notified as more of the image is converted.
See Also: java.awt.Image
See Also: java.awt.image.ImageObserver
See Also: java.awt.image.ImageObserver.imageUpdate(java.awt.Imageintintintintint)
since:
JDK1.0 |
| drawImage | | abstract public boolean drawImage(Image img, int x, int y, Color bgcolor, ImageObserver observer)(Code) | | Draws as much of the specified image as is currently available.
The image is drawn with its top-left corner at
(x, y) in this graphics context's coordinate
space. Transparent pixels are drawn in the specified
background color.
This operation is equivalent to filling a rectangle of the
width and height of the specified image with the given color and then
drawing the image on top of it, but possibly more efficient.
This method returns immediately in all cases, even if the
complete image has not yet been loaded, and it has not been dithered
and converted for the current output device.
If the image has not yet been completely loaded, then
drawImage returns false. As more of
the image becomes available, the process that draws the image notifies
the specified image observer.
Parameters:
img - the specified image to be drawn.
Parameters:
x - the x coordinate.
Parameters:
y - the y coordinate.
Parameters:
bgcolor - the background color to paint under thenon-opaque portions of the image.
Parameters:
observer - object to be notified as more of the image is converted.
See Also: java.awt.Image
See Also: java.awt.image.ImageObserver
See Also: java.awt.image.ImageObserver.imageUpdate(java.awt.Imageintintintintint)
since:
JDK1.0 |
| drawImage | | abstract public boolean drawImage(Image img, int x, int y, int width, int height, Color bgcolor, ImageObserver observer)(Code) | | Draws as much of the specified image as has already been scaled
to fit inside the specified rectangle.
The image is drawn inside the specified rectangle of this
graphics context's coordinate space, and is scaled if
necessary. Transparent pixels are drawn in the specified
background color.
This operation is equivalent to filling a rectangle of the
width and height of the specified image with the given color and then
drawing the image on top of it, but possibly more efficient.
This method returns immediately in all cases, even if the
entire image has not yet been scaled, dithered, and converted
for the current output device.
If the current output representation is not yet complete then
drawImage returns false. As more of
the image becomes available, the process that draws the image notifies
the specified image observer.
A scaled version of an image will not necessarily be
available immediately just because an unscaled version of the
image has been constructed for this output device. Each size of
the image may be cached separately and generated from the original
data in a separate image production sequence.
Parameters:
img - the specified image to be drawn.
Parameters:
x - the x coordinate.
Parameters:
y - the y coordinate.
Parameters:
width - the width of the rectangle.
Parameters:
height - the height of the rectangle.
Parameters:
bgcolor - the background color to paint under thenon-opaque portions of the image.
Parameters:
observer - object to be notified as more of the image is converted.
See Also: java.awt.Image
See Also: java.awt.image.ImageObserver
See Also: java.awt.image.ImageObserver.imageUpdate(java.awt.Imageintintintintint)
since:
JDK1.0 |
| drawImage | | abstract public boolean drawImage(Image img, int dx1, int dy1, int dx2, int dy2, int sx1, int sy1, int sx2, int sy2, ImageObserver observer)(Code) | | Draws as much of the specified area of the specified image as is
currently available, scaling it on the fly to fit inside the
specified area of the destination drawable surface. Transparent pixels
do not affect whatever pixels are already there.
This method returns immediately in all cases, even if the
image area to be drawn has not yet been scaled, dithered, and converted
for the current output device.
If the current output representation is not yet complete then
drawImage returns false. As more of
the image becomes available, the process that draws the image notifies
the specified image observer.
This method always uses the unscaled version of the image
to render the scaled rectangle and performs the required
scaling on the fly. It does not use a cached, scaled version
of the image for this operation. Scaling of the image from source
to destination is performed such that the first coordinate
of the source rectangle is mapped to the first coordinate of
the destination rectangle, and the second source coordinate is
mapped to the second destination coordinate. The subimage is
scaled and flipped as needed to preserve those mappings.
Parameters:
img - the specified image to be drawn
Parameters:
dx1 - the x coordinate of the first corner of thedestination rectangle.
Parameters:
dy1 - the y coordinate of the first corner of thedestination rectangle.
Parameters:
dx2 - the x coordinate of the second corner of thedestination rectangle.
Parameters:
dy2 - the y coordinate of the second corner of thedestination rectangle.
Parameters:
sx1 - the x coordinate of the first corner of thesource rectangle.
Parameters:
sy1 - the y coordinate of the first corner of thesource rectangle.
Parameters:
sx2 - the x coordinate of the second corner of thesource rectangle.
Parameters:
sy2 - the y coordinate of the second corner of thesource rectangle.
Parameters:
observer - object to be notified as more of the image isscaled and converted.
See Also: java.awt.Image
See Also: java.awt.image.ImageObserver
See Also: java.awt.image.ImageObserver.imageUpdate(java.awt.Imageintintintintint)
since:
JDK1.1 |
| drawImage | | abstract public boolean drawImage(Image img, int dx1, int dy1, int dx2, int dy2, int sx1, int sy1, int sx2, int sy2, Color bgcolor, ImageObserver observer)(Code) | | Draws as much of the specified area of the specified image as is
currently available, scaling it on the fly to fit inside the
specified area of the destination drawable surface.
Transparent pixels are drawn in the specified background color.
This operation is equivalent to filling a rectangle of the
width and height of the specified image with the given color and then
drawing the image on top of it, but possibly more efficient.
This method returns immediately in all cases, even if the
image area to be drawn has not yet been scaled, dithered, and converted
for the current output device.
If the current output representation is not yet complete then
drawImage returns false. As more of
the image becomes available, the process that draws the image notifies
the specified image observer.
This method always uses the unscaled version of the image
to render the scaled rectangle and performs the required
scaling on the fly. It does not use a cached, scaled version
of the image for this operation. Scaling of the image from source
to destination is performed such that the first coordinate
of the source rectangle is mapped to the first coordinate of
the destination rectangle, and the second source coordinate is
mapped to the second destination coordinate. The subimage is
scaled and flipped as needed to preserve those mappings.
Parameters:
img - the specified image to be drawn
Parameters:
dx1 - the x coordinate of the first corner of thedestination rectangle.
Parameters:
dy1 - the y coordinate of the first corner of thedestination rectangle.
Parameters:
dx2 - the x coordinate of the second corner of thedestination rectangle.
Parameters:
dy2 - the y coordinate of the second corner of thedestination rectangle.
Parameters:
sx1 - the x coordinate of the first corner of thesource rectangle.
Parameters:
sy1 - the y coordinate of the first corner of thesource rectangle.
Parameters:
sx2 - the x coordinate of the second corner of thesource rectangle.
Parameters:
sy2 - the y coordinate of the second corner of thesource rectangle.
Parameters:
bgcolor - the background color to paint under thenon-opaque portions of the image.
Parameters:
observer - object to be notified as more of the image isscaled and converted.
See Also: java.awt.Image
See Also: java.awt.image.ImageObserver
See Also: java.awt.image.ImageObserver.imageUpdate(java.awt.Imageintintintintint)
since:
JDK1.1 |
| drawLine | | abstract public void drawLine(int x1, int y1, int x2, int y2)(Code) | | Draws a line, using the current color, between the points
(x1, y1) and (x2, y2)
in this graphics context's coordinate system.
Parameters:
x1 - the first point's x coordinate.
Parameters:
y1 - the first point's y coordinate.
Parameters:
x2 - the second point's x coordinate.
Parameters:
y2 - the second point's y coordinate.
since:
JDK1.0 |
| drawOval | | abstract public void drawOval(int x, int y, int width, int height)(Code) | | Draws the outline of an oval.
The result is a circle or ellipse that fits within the
rectangle specified by the x, y,
width, and height arguments.
The oval covers an area that is
width + 1 pixels wide
and height + 1 pixels tall.
Parameters:
x - the x coordinate of the upper left corner of the oval to be drawn.
Parameters:
y - the y coordinate of the upper left corner of the oval to be drawn.
Parameters:
width - the width of the oval to be drawn.
Parameters:
height - the height of the oval to be drawn.
See Also: java.awt.Graphics.fillOval
since:
JDK1.0 |
| drawPolygon | | abstract public void drawPolygon(int xPoints, int yPoints, int nPoints)(Code) | | Draws a closed polygon defined by
arrays of x and y coordinates.
Each pair of (x, y) coordinates defines a point.
This method draws the polygon defined by nPoint line
segments, where the first nPoint - 1
line segments are line segments from
(xPoints[i - 1], yPoints[i - 1])
to (xPoints[i], yPoints[i]), for
1 ≤ i ≤ nPoints.
The figure is automatically closed by drawing a line connecting
the final point to the first point, if those points are different.
Parameters:
xPoints - a an array of x coordinates.
Parameters:
yPoints - a an array of y coordinates.
Parameters:
nPoints - a the total number of points.
See Also: java.awt.Graphics.fillPolygon
See Also: java.awt.Graphics.drawPolyline
since:
JDK1.0 |
| drawPolyline | | abstract public void drawPolyline(int xPoints, int yPoints, int nPoints)(Code) | | Draws a sequence of connected lines defined by
arrays of x and y coordinates.
Each pair of (x, y) coordinates defines a point.
The figure is not closed if the first point
differs from the last point.
Parameters:
xPoints - an array of x points
Parameters:
yPoints - an array of y points
Parameters:
nPoints - the total number of points
See Also: java.awt.Graphics.drawPolygon(int[]int[]int)
since:
JDK1.1 |
| drawRect | | public void drawRect(int x, int y, int width, int height)(Code) | | Draws the outline of the specified rectangle.
The left and right edges of the rectangle are at
x and x + width.
The top and bottom edges are at
y and y + height.
The rectangle is drawn using the graphics context's current color.
Parameters:
x - the x coordinate of the rectangle to be drawn.
Parameters:
y - the y coordinate of the rectangle to be drawn.
Parameters:
width - the width of the rectangle to be drawn.
Parameters:
height - the height of the rectangle to be drawn.
See Also: java.awt.Graphics.fillRect
See Also: java.awt.Graphics.clearRect
since:
JDK1.0 |
| drawRoundRect | | abstract public void drawRoundRect(int x, int y, int width, int height, int arcWidth, int arcHeight)(Code) | | Draws an outlined round-cornered rectangle using this graphics
context's current color. The left and right edges of the rectangle
are at x and x + width,
respectively. The top and bottom edges of the rectangle are at
y and y + height.
Parameters:
x - the x coordinate of the rectangle to be drawn.
Parameters:
y - the y coordinate of the rectangle to be drawn.
Parameters:
width - the width of the rectangle to be drawn.
Parameters:
height - the height of the rectangle to be drawn.
Parameters:
arcWidth - the horizontal diameter of the arc at the four corners.
Parameters:
arcHeight - the vertical diameter of the arc at the four corners.
See Also: java.awt.Graphics.fillRoundRect
since:
JDK1.0 |
| drawString | | abstract public void drawString(String str, int x, int y)(Code) | | Draws the text given by the specified string, using this
graphics context's current font and color. The baseline of the
first character is at position (x, y) in this
graphics context's coordinate system.
Parameters:
str - the string to be drawn.
Parameters:
x - the x coordinate.
Parameters:
y - the y coordinate.
See Also: java.awt.Graphics.drawBytes
See Also: java.awt.Graphics.drawChars
since:
JDK1.0 |
| fill3DRect | | public void fill3DRect(int x, int y, int width, int height, boolean raised)(Code) | | Paints a 3-D highlighted rectangle filled with the current color.
The edges of the rectangle will be highlighted so that it appears
as if the edges were beveled and lit from the upper left corner.
The colors used for the highlighting effect will be determined from
the current color.
Parameters:
x - the x coordinate of the rectangle to be filled.
Parameters:
y - the y coordinate of the rectangle to be filled.
Parameters:
width - the width of the rectangle to be filled.
Parameters:
height - the height of the rectangle to be filled.
Parameters:
raised - a boolean value that determines whether the rectangle appears to be raised above the surface or etched into the surface.
See Also: java.awt.Graphics.draw3DRect
since:
JDK1.0 |
| fillArc | | abstract public void fillArc(int x, int y, int width, int height, int startAngle, int arcAngle)(Code) | | Fills a circular or elliptical arc covering the specified rectangle.
The resulting arc begins at startAngle and extends
for arcAngle degrees.
Angles are interpreted such that 0 degrees
is at the 3 o'clock position.
A positive value indicates a counter-clockwise rotation
while a negative value indicates a clockwise rotation.
The center of the arc is the center of the rectangle whose origin
is (x, y) and whose size is specified by the
width and height arguments.
The resulting arc covers an area
width + 1 pixels wide
by height + 1 pixels tall.
Parameters:
x - the x coordinate of the upper-left corner of the arc to be filled.
Parameters:
y - the y coordinate of the upper-left corner of the arc to be filled.
Parameters:
width - the width of the arc to be filled.
Parameters:
height - the height of the arc to be filled.
Parameters:
startAngle - the beginning angle.
Parameters:
arcAngle - the angular extent of the arc, relative to the start angle.
See Also: java.awt.Graphics.drawArc
since:
JDK1.0 |
| fillOval | | abstract public void fillOval(int x, int y, int width, int height)(Code) | | Fills an oval bounded by the specified rectangle with the
current color.
Parameters:
x - the x coordinate of the upper left corner of the oval to be filled.
Parameters:
y - the y coordinate of the upper left corner of the oval to be filled.
Parameters:
width - the width of the oval to be filled.
Parameters:
height - the height of the oval to be filled.
See Also: java.awt.Graphics.drawOval
since:
JDK1.0 |
| fillPolygon | | abstract public void fillPolygon(int xPoints, int yPoints, int nPoints)(Code) | | Fills a closed polygon defined by
arrays of x and y coordinates.
This method draws the polygon defined by nPoint line
segments, where the first nPoint - 1
line segments are line segments from
(xPoints[i - 1], yPoints[i - 1])
to (xPoints[i], yPoints[i]), for
1 ≤ i ≤ nPoints.
The figure is automatically closed by drawing a line connecting
the final point to the first point, if those points are different.
The area inside the polygon is defined using an
even-odd fill rule, also known as the alternating rule.
Parameters:
xPoints - a an array of x coordinates.
Parameters:
yPoints - a an array of y coordinates.
Parameters:
nPoints - a the total number of points.
See Also: java.awt.Graphics.drawPolygon(int[]int[]int)
since:
JDK1.0 |
| fillPolygon | | public void fillPolygon(Polygon p)(Code) | | Fills the polygon defined by the specified Polygon object with
the graphics context's current color.
The area inside the polygon is defined using an
even-odd fill rule, also known as the alternating rule.
Parameters:
p - the polygon to fill.
See Also: java.awt.Graphics.drawPolygon(int[]int[]int)
since:
JDK1.0 |
| fillRect | | abstract public void fillRect(int x, int y, int width, int height)(Code) | | Fills the specified rectangle.
The left and right edges of the rectangle are at
x and x + width - 1.
The top and bottom edges are at
y and y + height - 1.
The resulting rectangle covers an area
width pixels wide by
height pixels tall.
The rectangle is filled using the graphics context's current color.
Parameters:
x - the x coordinate of the rectangle to be filled.
Parameters:
y - the y coordinate of the rectangle to be filled.
Parameters:
width - the width of the rectangle to be filled.
Parameters:
height - the height of the rectangle to be filled.
See Also: java.awt.Graphics.fillRect
See Also: java.awt.Graphics.clearRect
since:
JDK1.0 |
| fillRoundRect | | abstract public void fillRoundRect(int x, int y, int width, int height, int arcWidth, int arcHeight)(Code) | | Fills the specified rounded corner rectangle with the current color.
The left and right edges of the rectangle
are at x and x + width - 1,
respectively. The top and bottom edges of the rectangle are at
y and y + height - 1.
Parameters:
x - the x coordinate of the rectangle to be filled.
Parameters:
y - the y coordinate of the rectangle to be filled.
Parameters:
width - the width of the rectangle to be filled.
Parameters:
height - the height of the rectangle to be filled.
Parameters:
arcWidth - the horizontal diameter of the arc at the four corners.
Parameters:
arcHeight - the vertical diameter of the arc at the four corners.
See Also: java.awt.Graphics.drawRoundRect
since:
JDK1.0 |
| finalize | | public void finalize()(Code) | | Disposes of this graphics context once it is no longer referenced.
See Also: Graphics.dispose
since:
JDK1.0 |
| getClipBounds | | public Rectangle getClipBounds(Rectangle r)(Code) | | Returns the bounding rectangle of the current clipping area.
The coordinates in the rectangle are relative to the coordinate
system origin of this graphics context. This method differs
from
Graphics.getClipBounds() getClipBounds in that an existing
rectangle is used instead of allocating a new one.
This method refers to the user clip, which is independent of the
clipping associated with device bounds and window visibility.
If no clip has previously been set, or if the clip has been
cleared using setClip(null), this method returns the
specified Rectangle.
Parameters:
r - the rectangle where the current clipping area iscopied to. Any current values in this rectangle areoverwritten. the bounding rectangle of the current clipping area. |
| hitClip | | public boolean hitClip(int x, int y, int width, int height)(Code) | | Returns true if the specified rectangular area intersects
the bounding rectangle of the current clipping area.
The coordinates in the rectangle are relative to the coordinate
system origin of this graphics context.
Parameters:
x - the x coordinate of the rectangle to test against the clip
Parameters:
y - the y coordinate of the rectangle to test against the clip
Parameters:
width - the width of the rectangle to test against the clip
Parameters:
height - the height of the rectangle to test against the clip |
| setClip | | abstract public void setClip(int x, int y, int width, int height)(Code) | | Sets the current clip to the rectangle specified by the given
coordinates.
Rendering operations have no effect outside of the clipping area.
Parameters:
x - the x coordinate of the new clip rectangle.
Parameters:
y - the y coordinate of the new clip rectangle.
Parameters:
width - the width of the new clip rectangle.
Parameters:
height - the height of the new clip rectangle.
See Also: java.awt.Graphics.clipRect
See Also: java.awt.Graphics.setClip(Shape)
since:
JDK1.1 |
| setColor | | abstract public void setColor(Color c)(Code) | | Sets this graphics context's current color to the specified
color. All subsequent graphics operations using this graphics
context use this specified color.
Parameters:
c - the new rendering color.
See Also: java.awt.Color
See Also: java.awt.Graphics.getColor
since:
JDK1.0 |
| setPaintMode | | abstract public void setPaintMode()(Code) | | Sets the paint mode of this graphics context to overwrite the
destination with this graphics context's current color.
This sets the logical pixel operation function to the paint or
overwrite mode. All subsequent rendering operations will
overwrite the destination with the current color.
since:
JDK1.0 |
| setXORMode | | abstract public void setXORMode(Color c1)(Code) | | This method sets the graphics context to xor paint mode using
the "exclusive or" color xorcolor.
This specifies that logical pixel operations are performed in the
XOR mode, which alternates pixels between the current color and
a specified XOR color.
When drawing operations are performed, pixels which are the
current color are changed to the specified color, and vice versa.
Pixels that are of colors other than those two colors are changed
in an unpredictable but reversible manner; if the same figure is
drawn twice, then all pixels are restored to their original values.
Compatibility
Both PersonalJava and Personal Profile implementations are not required
to support this method.
System Properties
The System Property java.awt.graphics.SupportsXorMode is set to
"true" or "false" indicating if the platform supports
XOR rendering.
Parameters:
c1 - the XOR alternation color UnsupportedOperationException if the implementation doesnot support an XOR paint mode.
since:
JDK1.0 |
| toString | | public String toString()(Code) | | Returns a String object representing this
Graphics object's value.
a string representation of this graphics context.
since:
JDK1.0 |
| translate | | abstract public void translate(int x, int y)(Code) | | Translates the origin of the graphics context to the point
(x, y) in the current coordinate system.
Modifies this graphics context so that its new origin corresponds
to the point (x, y) in this graphics context's
original coordinate system. All coordinates used in subsequent
rendering operations on this graphics context will be relative
to this new origin.
Parameters:
x - the x coordinate.
Parameters:
y - the y coordinate.
since:
JDK1.0 |
|
|