| java.lang.Object
 org.jdom.input.SAXBuilder
| SAXBuilder | | public class SAXBuilder (Code) | | Builds a JDOM document from files, streams, readers, URLs, or a SAX
org.xml.sax.InputSource instance using a SAX parser. The builder uses a
third-party SAX parser (chosen by JAXP by default, or you can choose
manually) to handle the parsing duties and simply listens to the SAX events
to construct a document. Details which SAX does not provide, such as
whitespace outside the root element, are not represented in the JDOM
document. Information about SAX can be found at http://www.saxproject.org.
Known issues: Relative paths for a
DocType or
EntityRef may
be converted by the SAX parser into absolute paths.
version:
$Revision: 1.1 $, $Date: 2005/04/27 09:32:40 $
author:
Jason Hunter
author:
Brett McLaughlin
author:
Dan Schaffer
author:
Philip Nelson
author:
Alex Rosen |
| Constructor Summary | |
| public | SAXBuilder()
Creates a new SAXBuilder which will attempt to first locate
a parser via JAXP, then will try to use a set of default
SAX Drivers. | | public | SAXBuilder(boolean validate)
Creates a new SAXBuilder which will attempt to first locate
a parser via JAXP, then will try to use a set of default
SAX Drivers. | | public | SAXBuilder(String saxDriverClass)
Creates a new SAXBuilder using the specified SAX parser. | | public | SAXBuilder(String saxDriverClass, boolean validate)
Creates a new SAXBuilder using the specified SAX parser. |
| Method Summary | |
| public Document | build(InputSource in)
This builds a document from the supplied
input source. | | public Document | build(InputStream in)
This builds a document from the supplied
input stream. | | public Document | build(File file)
This builds a document from the supplied
filename. | | public Document | build(URL url)
This builds a document from the supplied
URL.
Parameters:
url - URL to read from. | | public Document | build(InputStream in, String systemId)
This builds a document from the supplied
input stream. | | public Document | build(Reader characterStream)
This builds a document from the supplied
Reader. | | public Document | build(Reader characterStream, String systemId)
This builds a document from the supplied
Reader. | | public Document | build(String systemId)
This builds a document from the supplied
URI. | | protected void | configureContentHandler(SAXHandler contentHandler)
This configures the SAXHandler that will be used to build the Document. | | protected void | configureParser(XMLReader parser, SAXHandler contentHandler)
This configures the XMLReader to be used for reading the XML document.
The default implementation sets various options on the given XMLReader,
such as validation, DTD resolution, entity handlers, etc., according
to the options that were set (e.g. | | protected SAXHandler | createContentHandler()
This creates the SAXHandler that will be used to build the Document. | | protected XMLReader | createParser()
This creates the XMLReader to be used for reading the XML document.
The default behavior is to (1) use the saxDriverClass, if it has been
set, (2) try to obtain a parser from JAXP, if it is available, and
(3) if all else fails, use a hard-coded default parser (currently
the Xerces parser). | | public DTDHandler | getDTDHandler()
Returns the
DTDHandler assigned, or null if none. | | public String | getDriverClass()
Returns the driver class assigned in the constructor, or null if none. | | public EntityResolver | getEntityResolver()
Returns the
EntityResolver assigned, or null if none. | | public ErrorHandler | getErrorHandler()
Returns the
ErrorHandler assigned, or null if none. | | public boolean | getExpandEntities()
Returns whether or not entities are being expanded into normal text
content. | | public JDOMFactory | getFactory()
Returns the current
org.jdom.JDOMFactory in use. | | public boolean | getIgnoringElementContentWhitespace()
Returns whether element content whitespace is to be ignored during the
build. | | public boolean | getReuseParser()
Returns whether the contained SAX parser instance is reused across
multiple parses. | | public boolean | getValidation()
Returns whether validation is to be performed during the build. | | public XMLFilter | getXMLFilter()
Returns the
XMLFilter used during parsing, or null if none. | | public void | setDTDHandler(DTDHandler dtdHandler)
This sets custom DTDHandler for the Builder. | | public void | setEntityResolver(EntityResolver entityResolver)
This sets custom EntityResolver for the Builder. | | public void | setErrorHandler(ErrorHandler errorHandler)
This sets custom ErrorHandler for the Builder. | | public void | setExpandEntities(boolean expand)
This sets whether or not to expand entities for the builder.
A true means to expand entities as normal content. | | public void | setFactory(JDOMFactory factory)
This sets a custom JDOMFactory for the builder. | | public void | setFeature(String name, boolean value)
This sets a feature on the SAX parser. | | public void | setIgnoringElementContentWhitespace(boolean ignoringWhite)
Specifies whether or not the parser should elminate whitespace in
element content (sometimes known as "ignorable whitespace") when
building the document. | | public void | setProperty(String name, Object value)
This sets a property on the SAX parser. | | public void | setReuseParser(boolean reuseParser)
Specifies whether this builder shall reuse the same SAX parser
when performing subsequent parses or allocate a new parser for
each parse. | | public void | setValidation(boolean validate)
This sets validation for the builder. | | public void | setXMLFilter(XMLFilter xmlFilter)
This sets a custom
org.xml.sax.XMLFilter for the builder. |
| SAXBuilder | | public SAXBuilder()(Code) | | Creates a new SAXBuilder which will attempt to first locate
a parser via JAXP, then will try to use a set of default
SAX Drivers. The underlying parser will not validate.
|
| SAXBuilder | | public SAXBuilder(boolean validate)(Code) | | Creates a new SAXBuilder which will attempt to first locate
a parser via JAXP, then will try to use a set of default
SAX Drivers. The underlying parser will validate or not
according to the given parameter.
Parameters:
validate - boolean indicating ifvalidation should occur. |
| SAXBuilder | | public SAXBuilder(String saxDriverClass)(Code) | | Creates a new SAXBuilder using the specified SAX parser.
The underlying parser will not validate.
Parameters:
saxDriverClass - String name of SAX Driverto use for parsing. |
| SAXBuilder | | public SAXBuilder(String saxDriverClass, boolean validate)(Code) | | Creates a new SAXBuilder using the specified SAX parser.
The underlying parser will validate or not
according to the given parameter.
Parameters:
saxDriverClass - String name of SAX Driverto use for parsing.
Parameters:
validate - boolean indicating ifvalidation should occur. |
| build | | public Document build(File file) throws JDOMException, IOException(Code) | |
This builds a document from the supplied
filename.
Parameters:
file - File to read from Document resultant Document object
throws:
JDOMException - when errors occur in parsing
throws:
IOException - when an I/O error prevents a documentfrom being fully parsed |
| build | | public Document build(URL url) throws JDOMException, IOException(Code) | |
This builds a document from the supplied
URL.
Parameters:
url - URL to read from. Document - resultant Document object.
throws:
JDOMException - when errors occur in parsing
throws:
IOException - when an I/O error prevents a documentfrom being fully parsed. |
| build | | public Document build(InputStream in, String systemId) throws JDOMException, IOException(Code) | |
This builds a document from the supplied
input stream.
Parameters:
in - InputStream to read from.
Parameters:
systemId - base for resolving relative URIs Document resultant Document object
throws:
JDOMException - when errors occur in parsing
throws:
IOException - when an I/O error prevents a documentfrom being fully parsed |
| build | | public Document build(Reader characterStream) throws JDOMException, IOException(Code) | |
This builds a document from the supplied
Reader. It's the programmer's responsibility to make sure
the reader matches the encoding of the file. It's often easier
and safer to use an InputStream rather than a Reader, and to let the
parser auto-detect the encoding from the XML declaration.
Parameters:
characterStream - Reader to read from Document resultant Document object
throws:
JDOMException - when errors occur in parsing
throws:
IOException - when an I/O error prevents a documentfrom being fully parsed |
| build | | public Document build(Reader characterStream, String systemId) throws JDOMException, IOException(Code) | |
This builds a document from the supplied
Reader. It's the programmer's responsibility to make sure
the reader matches the encoding of the file. It's often easier
and safer to use an InputStream rather than a Reader, and to let the
parser auto-detect the encoding from the XML declaration.
Parameters:
characterStream - Reader to read from.
Parameters:
systemId - base for resolving relative URIs Document resultant Document object
throws:
JDOMException - when errors occur in parsing
throws:
IOException - when an I/O error prevents a documentfrom being fully parsed |
| configureContentHandler | | protected void configureContentHandler(SAXHandler contentHandler)(Code) | | This configures the SAXHandler that will be used to build the Document.
The default implementation simply passes through some configuration
settings that were set on the SAXBuilder: setExpandEntities() and
setIgnoringElementContentWhitespace().
|
| configureParser | | protected void configureParser(XMLReader parser, SAXHandler contentHandler) throws JDOMException(Code) | | This configures the XMLReader to be used for reading the XML document.
The default implementation sets various options on the given XMLReader,
such as validation, DTD resolution, entity handlers, etc., according
to the options that were set (e.g. via setEntityResolver)
and set various SAX properties and features that are required for JDOM
internals. These features may change in future releases, so change this
behavior at your own risk.
|
| createContentHandler | | protected SAXHandler createContentHandler()(Code) | | This creates the SAXHandler that will be used to build the Document.
SAXHandler - resultant SAXHandler object. |
| createParser | | protected XMLReader createParser() throws JDOMException(Code) | | This creates the XMLReader to be used for reading the XML document.
The default behavior is to (1) use the saxDriverClass, if it has been
set, (2) try to obtain a parser from JAXP, if it is available, and
(3) if all else fails, use a hard-coded default parser (currently
the Xerces parser). Subclasses may override this method to determine
the parser to use in a different way.
XMLReader - resultant XMLReader object. |
| getDriverClass | | public String getDriverClass()(Code) | | Returns the driver class assigned in the constructor, or null if none.
the driver class assigned in the constructor |
| getErrorHandler | | public ErrorHandler getErrorHandler()(Code) | | Returns the
ErrorHandler assigned, or null if none.
the ErrorHandler assigned, or null if none |
| getExpandEntities | | public boolean getExpandEntities()(Code) | | Returns whether or not entities are being expanded into normal text
content.
whether entities are being expanded |
| getIgnoringElementContentWhitespace | | public boolean getIgnoringElementContentWhitespace()(Code) | | Returns whether element content whitespace is to be ignored during the
build.
whether element content whitespace is to be ignored during thebuild |
| getReuseParser | | public boolean getReuseParser()(Code) | | Returns whether the contained SAX parser instance is reused across
multiple parses. The default is true.
whether the contained SAX parser instance is reused acrossmultiple parses |
| getValidation | | public boolean getValidation()(Code) | | Returns whether validation is to be performed during the build.
whether validation is to be performed during the build |
| getXMLFilter | | public XMLFilter getXMLFilter()(Code) | | Returns the
XMLFilter used during parsing, or null if none.
the XMLFilter used during parsing |
| setDTDHandler | | public void setDTDHandler(DTDHandler dtdHandler)(Code) | | This sets custom DTDHandler for the Builder.
Parameters:
dtdHandler - DTDHandler |
| setEntityResolver | | public void setEntityResolver(EntityResolver entityResolver)(Code) | | This sets custom EntityResolver for the Builder.
Parameters:
entityResolver - EntityResolver |
| setErrorHandler | | public void setErrorHandler(ErrorHandler errorHandler)(Code) | | This sets custom ErrorHandler for the Builder.
Parameters:
errorHandler - ErrorHandler |
| setExpandEntities | | public void setExpandEntities(boolean expand)(Code) | |
This sets whether or not to expand entities for the builder.
A true means to expand entities as normal content. A false means to
leave entities unexpanded as EntityRef objects. The
default is true.
When this setting is false, the internal DTD subset is retained; when
this setting is true, the internal DTD subset is not retained.
Note that Xerces (at least up to 1.4.4) has a bug where entities
in attribute values will be misreported if this flag is turned off,
resulting in entities to appear within element content. When turning
entity expansion off either avoid entities in attribute values, or
use another parser like Crimson.
http://nagoya.apache.org/bugzilla/show_bug.cgi?id=6111
Parameters:
expand - boolean indicating whether entity expansionshould occur. |
| setFactory | | public void setFactory(JDOMFactory factory)(Code) | | This sets a custom JDOMFactory for the builder. Use this to build
the tree with your own subclasses of the JDOM classes.
Parameters:
factory - JDOMFactory to use |
| setFeature | | public void setFeature(String name, boolean value)(Code) | | This sets a feature on the SAX parser. See the SAX documentation for
NOTE: SAXBuilder requires that some particular features of the SAX parser be
set up in certain ways for it to work properly. The list of such features
may change in the future. Therefore, the use of this method may cause
parsing to break, and even if it doesn't break anything today it might
break parsing in a future JDOM version, because what JDOM parsers require
may change over time. Use with caution.
Parameters:
name - The feature name, which is a fully-qualified URI.
Parameters:
value - The requested state of the feature (true or false). |
| setIgnoringElementContentWhitespace | | public void setIgnoringElementContentWhitespace(boolean ignoringWhite)(Code) | | Specifies whether or not the parser should elminate whitespace in
element content (sometimes known as "ignorable whitespace") when
building the document. Only whitespace which is contained within
element content that has an element only content model will be
eliminated (see XML Rec 3.2.1). For this setting to take effect
requires that validation be turned on. The default value of this
setting is false.
Parameters:
ignoringWhite - Whether to ignore ignorable whitespace |
| setProperty | | public void setProperty(String name, Object value)(Code) | | This sets a property on the SAX parser. See the SAX documentation for
more information.
NOTE: SAXBuilder requires that some particular properties of the SAX parser be
set up in certain ways for it to work properly. The list of such properties
may change in the future. Therefore, the use of this method may cause
parsing to break, and even if it doesn't break anything today it might
break parsing in a future JDOM version, because what JDOM parsers require
may change over time. Use with caution.
Parameters:
name - The property name, which is a fully-qualified URI.
Parameters:
value - The requested value for the property. |
| setReuseParser | | public void setReuseParser(boolean reuseParser)(Code) | | Specifies whether this builder shall reuse the same SAX parser
when performing subsequent parses or allocate a new parser for
each parse. The default value of this setting is
true (parser reuse).
Note: As SAX parser instances are not thread safe,
the parser reuse feature should not be used with SAXBuilder instances
shared among threads.
Parameters:
reuseParser - Whether to reuse the SAX parser. |
| setValidation | | public void setValidation(boolean validate)(Code) | | This sets validation for the builder.
Parameters:
validate - boolean indicating whether validationshould occur. |
|
|